Teltonika PR1ICA70 Outdoor 5G/LTE, Wi-Fi and GNSS Antenna

7-in-1 Outdoor Antenna for Teltonika RUTX50 and RUTM50

The Teltonika PR1ICA70 is an outdoor combination antenna designed specifically for Teltonika RUTX50 and RUTM50 industrial 5G routers.

It combines four 5G/LTE antennas, two dual-band Wi-Fi antennas, and one active GNSS antenna in a single IP67-rated enclosure. Its omnidirectional design provides signal coverage from multiple directions, while flexible wall, ceiling, and mast mounting options make it suitable for industrial buildings, remote sites, outdoor cabinets, warehouses, transport facilities, and smart infrastructure.

Key Features

7-in-1 Antenna System

The PR1ICA70 combines seven antenna elements in one enclosure:

• 4 × 5G/LTE antennas
• 2 × Dual-band Wi-Fi antennas
• 1 × Active GNSS antenna

This consolidated design reduces the need to install and manage multiple separate antennas.

Designed for RUTX50 and RUTM50

The antenna is designed for direct connection to:

• Teltonika RUTX50
• Teltonika RUTM50

Its connector arrangement matches the cellular, Wi-Fi, and GNSS antenna connections on these compatible routers.

Wide 5G and LTE Frequency Coverage

The four cellular antenna elements cover:

• 617-960MHz
• 1700-2700MHz
• 3300-4300MHz

This enables operation across a wide range of supported 4G LTE and sub-6GHz 5G frequencies.

Dual-Band Wi-Fi Coverage

Two integrated Wi-Fi antennas cover:

• 2400-2500MHz
• 4700-6000MHz

The antenna supports the 2.4GHz and 5GHz Wi-Fi bands used by compatible Teltonika routers.

Active GNSS Antenna

The integrated GNSS antenna operates from 1560 to 1610MHz and provides a gain of up to 28dBi.

It supports positioning services provided by the connected compatible router. Actual satellite availability and positioning performance depend on antenna placement, sky visibility, supported GNSS systems, and surrounding conditions.

Omnidirectional Coverage

The cellular and Wi-Fi elements use an omnidirectional radiation pattern, helping provide coverage without requiring precise alignment toward a single cellular tower or Wi-Fi device.

Outdoor IP67 Protection

The IP67-rated enclosure provides protection against dust and temporary water immersion under defined test conditions.

This makes the antenna suitable for outdoor and exposed installations when it is mounted and sealed correctly.

Flexible Installation

The antenna can be installed using:

• Wall mounting
• Ceiling mounting
• Mast or pole mounting

Select a position with minimal obstruction and suitable visibility toward cellular networks and GNSS satellites.

Industrial Temperature Range

The PR1ICA70 is designed to operate in temperatures from -40°C to +75°C, making it suitable for demanding outdoor and industrial environments.

Recommended Applications

• Remote industrial sites
• Warehouses and factories
• Outdoor network cabinets
• Smart-city infrastructure
• Energy and utility installations
• Construction sites
• Agriculture and smart farming
• Security and surveillance networks
• Transportation facilities
• Remote offices
• Temporary project locations
• Cellular backup installations
• Locations with weak indoor cellular reception

Technical Specifications

5G/LTE Antennas

• Quantity: 4
• Frequency range: 617-960MHz, 1700-2700MHz and 3300-4300MHz
• Maximum gain: 4.5dBi
• Polarization: Vertical
• Radiation pattern: Omnidirectional
• VSWR: Less than 2.50
• Impedance: 50Ω
• Connectors: 4 × SMA male

Wi-Fi Antennas

• Quantity: 2
• Frequency range: 2400-2500MHz and 4700-6000MHz
• Maximum gain: 7.5dBi
• Polarization: Vertical
• Radiation pattern: Omnidirectional
• VSWR: Less than 2.00
• Impedance: 50Ω
• Connectors: 2 × RP-SMA male

GNSS Antenna

• Quantity: 1
• Frequency range: 1560-1610MHz
• Gain: 28dBi
• Polarization: RHCP
• VSWR: Less than 2.00
• Impedance: 50Ω
• Connector: 1 × SMA male
• Supply voltage: 2.5-6.5V DC
• Current consumption: 2.5-6.5mA

Mechanical and Environmental

• Brand: Teltonika Networks
• Order code: PR1ICA70
• Product type: Outdoor combination antenna
• Total antenna elements: 7
• Cable configuration: 6 × RG316 and 1 × RG174
• Mounting options: Wall, ceiling and mast
• Protection rating: IP67
• Operating temperature: -40°C to +75°C
• Weight: Approximately 1.5 kg
• Approximate maximum dimensions: 347 × 240 × 160 mm
• Compliance: RoHS

Compatibility

Officially designed for:

• Teltonika RUTX50
• Teltonika RUTM50

Compatibility with other routers should not be assumed based only on connector appearance. The connected device must provide the correct number and type of cellular, Wi-Fi, and GNSS connections and must support the antenna’s electrical specifications.

Installation Recommendations

• Install the antenna in an elevated location with minimal surrounding obstructions.
• Provide the GNSS element with the clearest possible view of the sky.
• Avoid sharp cable bends, cable crushing, and unnecessary cable extensions.
• Tighten connectors securely without overtightening.
• Weatherproof cable entry points and connector areas when required.
• Maintain safe clearance from electrical lines and lightning-prone structures.
• Use suitable surge and lightning protection where required by the installation.
• Professional installation is recommended for rooftop, mast, and exposed outdoor applications.

Important Information

• The PR1ICA70 is an antenna accessory; it does not include a cellular router.
• Teltonika RUTX50 or RUTM50 must be purchased separately unless specifically included in a bundle.
• This antenna does not independently provide internet, Wi-Fi, or GPS tracking.
• Cellular service requires a compatible router, SIM card, data plan, and supported mobile network.
• GNSS operation requires a compatible router with an active GNSS antenna port.
• Actual signal improvement depends on network coverage, frequency bands, antenna height, cable loss, surrounding structures, interference, and installation quality.
• IP67 protection applies only when the product is installed correctly and all cable entry points are appropriately protected.

Short Description

The Teltonika PR1ICA70 is a 7-in-1 outdoor antenna for RUTX50 and RUTM50 routers, combining four 5G/LTE antennas, two dual-band Wi-Fi antennas, and one active GNSS antenna in a durable IP67-rated enclosure.